Debug Sw-Vlan - Cisco ME 3800X Command Reference Manual

Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands

debug sw-vlan

To enable debugging of VLAN manager activities, use the debug sw-vlan command in privileged EXEC
mode. To disable debugging, use the no form of this command.
Syntax Description badpmcookies
cfg-vlan {bootup | cli}
events
ifs
management
notification
packets
registries
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(52)EY
Usage Guidelines
The undebug sw-vlan command is the same as the no debug sw-vlan command.
Related Commands Command
show debugging
show vlan
OL-28238-01
debug sw-vlan {badpmcookies | cfg-vlan {bootup | cli} | events | ifs | management | notification
| packets | registries}
no debug sw-vlan {badpmcookies | cfg-vlan {bootup | cli} | events | ifs | management |
notification | packets | registries}
Displays debug messages for VLAN manager incidents of bad port manager
cookies.
Displays config-vlan debug messages. The keywords have these meanings:
•
•
Displays debug messages for VLAN manager events.
See the
Displays debug messages for VLAN manager management of internal
VLANs.
See the
Displays debug messages for packet handling and encapsulation processes.
Displays debug messages for VLAN manager registries.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays the parameters for all configured VLANs or one VLAN (if the
VLAN name or ID is specified) in the administrative domain.
bootup—Display messages when the switch is booting up.
cli—Display messages when the command-line interface (CLI) is in
config-vlan mode.
debug sw-vlan ifs command.
debug sw-vlan notification
Cisco ME 3800X and ME 3600X Switch Command Reference
debug sw-vlan
command.
B-31