Debug Mac-Notification - Cisco ME 3800X Command Reference Manual

Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands

debug mac-notification

To enable debugging of MAC notification events, use the debug mac-notification command in
privileged EXEC mode. To disable debugging, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(52)EY
Usage Guidelines The undebug mac-notification command is the same as the no debug mac-notification command.
Related Commands Command
show debugging
show mac
address-table
notification
OL-28238-01
debug mac-notification
no debug mac-notification
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays the MAC address notification information for all interfaces or the
specified interface.
Cisco ME 3800X and ME 3600X Switch Command Reference
debug mac-notification
B-11