Cisco ME 3800X Command Reference Manual page 170

mac access-group
You can verify MAC ACL configuration by entering the show mac access-group privileged EXEC
command. You can see configured ACLs on the switch by entering the show access-lists privileged
EXEC command.
Note For more information about configuring MAC extended ACLs, see the "Configuring Network Security
with ACLs" chapter in the software configuration guide for this release.
Examples This example shows how to apply a MAC extended ACL named macacl2 to an interface:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# mac access-group macacl2 in
Related Commands Command
show access-lists
show mac access-group
show running-config
Cisco ME 3800X and ME 3600X Switch Command Reference
2-146
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
Description
Displays the ACLs configured on the switch.
Displays the MAC ACLs configured on the switch.
Displays the operating configuration.
OL-28238-01