Debug Ethernet Service - Cisco ME 3800X Command Reference Manual

debug ethernet service

debug ethernet service
To enable debugging of Ethernet customer service instances, use the debug ethernet service command
in privileged EXEC mode. To disable debugging, use the no form of this command.
Syntax Description all
api
error
evc
id evc-id
instance
id id interface-id
interface
interface-id
interface
[interface-id]
oam-mgr
Command Default
Ethernet service debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(52)EY
Usage Guidelines The undebug ethernet service command is the same as the no debug ethernet service command.
Cisco ME 3800X and ME 3600X Switch Command Reference
B-4
debug ethernet service {all | api | error | evc [id evc-id] | instance [id id interface-id | interface
interface-id] | interface [interface-id] | oam-mgr}
no debug ethernet service {all | api | error | evc [id evc-id] | instance [id id interface-id | interface
interface-id] | interface [interface-id] | oam-mgr}
Displays all Ethernet customer-service debug messages.
Displays debug messages about the interaction between the Ethernet
infrastructure and its clients.
Displays Ethernet customer-service error messages occurring in the Ethernet
infrastructure subsystem.
Displays Ethernet virtual connection (EVC) debug messages
(Optional) Displays EVC debug messages relevant to a specific EVC identifier.
The EVC identifier can be a string of from 1 to 100 characters.
Displays debug messages related to Ethernet customer-service instances.
(Optional) Displays Ethernet service-instance debug messages for a specific
Ethernet service instance ID and interface. The service identifier range is 1 to
4294967295. The interface is a physical interface.
(Optional) When entered after the instance keyword, displays service-instance
debug messages for the interface. You must enter an interface ID.
Displays debugging for Ethernet services on all interfaces or the specified
interface.
Displays debug messages for the Ethernet operation, administration, and
maintenance (OAM) manager component of the infrastructure.
Modification
This command was introduced.
Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands
OL-28238-01