Archive Download-Sw - Cisco ME 3800X Command Reference Manual
Hide thumbs
Also See for ME 3800X:
- Installation manual (80 pages) ,
- Software manual (956 pages) ,
- Manual (94 pages)
Table of Contents
Advertisement
Chapter 2
Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
archive download-sw
To download a new image from a TFTP server to the switch and to overwrite or keep the existing image,
use the archive download-sw command in privileged EXEC mode.
Syntax Description
/force-reload
/imageonly
/leave-old-sw
/no-set-boot
/no-version-check
/overwrite
/reload
/safe
source-url
OL-28238-01
archive download-sw {/force-reload | /imageonly | /leave-old-sw | /no-set-boot |
/no-version-check | /overwrite | /reload | /safe} source-url
Unconditionally forces a system reload after successfully downloading the
software image.
Downloads only the software image but not the HTML files associated with
the embedded device manager. The HTML files for the existing version are
deleted only if the existing version is being overwritten or removed.
Keeps the old software version after a successful download.
Specified to not alter the setting of the BOOT environment variable to point
to the new software image after it is successfully downloaded.
Downloads the software image without checking to prevent installing an
incompatible image.
Overwrites the software image in flash memory with the downloaded one.
Reloads the system after successfully downloading the image unless the
configuration has been changed and not been saved.
Keeps the current software image; do not delete it to make room for the new
software image before the new image is downloaded. The current image is
deleted after the download.
The source URL alias for a local or network file system. These options are
supported:
•
•
•
•
•
•
The image-name.tar is the software image to download and install on the
switch.
The syntax for the local flash file system:
flash:
The syntax for the FTP:
ftp:[[//username[:password]@location]/directory]/image-name.tar
The syntax for an HTTP server:
http://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
The syntax for a secure HTTP server:
https://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
The syntax for the Remote Copy Protocol (RCP):
rcp:[[//username@location]/directory]/image-name.tar
The syntax for the TFTP:
tftp:[[//location]/directory]/image-name.tar
Cisco ME 3800X and ME 3600X Switch Command Reference
archive download-sw
2-9
Advertisement
Table of Contents
