Figure 17. Web Ui Connection Window; Using Web Ui - Samsung WEC8500 Operation Manual

2.2

Using Web UI

2.2.1 Web UI Connection
To use the WEC, i.e. Web UI of APC system, the IP address of ethernet port must be set up.
When connecting to the IP address of APC ethernet port in a web browser, the below login
window is displayed. Log in using a default connection account 'samsung'.
After the first login, you go through the course of changing the password. If you have
changed the password by connecting to the CLI, you don't have to go through the course of
changing the password.
© SAMSUNG Electronics Co., Ltd.

Figure 17. Web UI Connection Window

CHAPTER 2. Basic System Configuration
page 46 of 689