Advanced Configuration - Samsung WEC8500 Operation Manual

[Channel Configuration]

CURRENT CHANNEL: Channel configuration (range: 1-14)

CHANNEL FIX: The configured channel is configured as fixed and it is not affected
by automatic adjustment functions such as RRM. When the <Monitor>  <Access
Points>  <Radio>  <802.11b/g/n> menu is selected, the channel value is shown
as * (optional).
[TX Power Setting]

TX CURRENT POWER: TX power (range: 3-30)

TX POWER FIX: The configured TX power is configured as fixed and it is not
affected by automatic adjustment functions such as RRM. When the <Monitor> 
<Access Points>  <Radio>  <802.11b/g/n> menu is selected, the TxPower value
is shown as * (optional).
To check the configured channel and TX power information, go to <Monitor> 
<Access Points>  <Radio>  <802.11b/g/n>.
[General]

Max. Allowed Stations on an AP: Define max allowed stationsfor each Radio.

CONTROLLED VOICE OPTIMIZATION: set voice optimization.

Multi-antenna Mode: set Dynamic/Static.
4.2.1.6

Advanced Configuration

In order to provide the same services to the APs allocated to each group, the APC allows
configuration of advanced settings for each AP group.
Configuring AP Group Profile with CLI
1) Go to the configure mode of the CLI.
WEC8500# configure terminal
WEC8500/configure#
2) Create an AP group or enter the AP group configuration mode.

ap-group [AP_GROUP_NAME]
3) Enter the profile configuration mode for the AP group.

profile
4) Configure the following AP group profiles:

overwrite-apc-ap-timer
© SAMSUNG Electronics Co., Ltd.
CHAPTER 4. AP Connection Management
page 181 of 689