Parameter
ENABLE
PRIMARY-IP
RIGHT-SUBNET
RIGHT-SUBNET-MASK
AUTH-MODE
IKE-VERSION
IKE-LIFETIME
IPSEC-LIFETIME
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Access Points> AP selection <General> menu in the sub-menus.
The setting options in the General tab are as follows. Click the <Apply> button to apply
the settings.
AP NAME: AP name
AP GROUP NAME: Indicates name of the AP GROUP to which the AP belongs.
REMOTE AP GROUP NAME: Indicates name of the REMOTE AP GROUP to which
the AP belongs.
© SAMSUNG Electronics Co., Ltd.
Enables/disables the IPSec function.
Configures the address of the primary security gateway.
Configures the address of the traffic selector for IPSec.
Configures subnet mask of the traffic selector for IPSec.
Configures the authentication mode used in IPSec.
PSK/PKI
Configures the IKE version.
1/2
Configures the IKE SA validity. (Unit: hours)
Configures the IPSec SA validity. (Unit: minutes)
Figure 107. AP Profile Setting (1)
CHAPTER 4. AP Connection Management
Description
page 206 of 689