Figure 37. Interfaces Window (1) - Samsung WEC8500 Operation Manual

[shutdown]
This is a command that makes the interface not working. The 'no' parameter is used to
restart the interface.

shutdown

no shutdown
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <Interfaces> menu in the sub-menus. You can configure an interface and
VLAN.
The Interface initial window is shown below.
[Adding VLAN]
1) In the Interface initial window, click the <Add> button to go to VLAN creation
window.
2) Enter an INTERFACE NAME and VLAN ID in the VLAN creation window.
The INTERFACE NAME describes a VLAN to create and English characters without
a space, numbers, and '_' can be used. The VLAN ID is the number from 1 to 4094
and it specifies a unique VLAN value.
Click the <Apply> button to go to detail configuration screen.
© SAMSUNG Electronics Co., Ltd.

Figure 37. Interfaces Window (1)

Figure 38. Interfaces Window (2)
CHAPTER 3. Data Network Function
page 66 of 689