Figure 143. Dynamic Wep Configuration Window - Samsung WEC8500 Operation Manual

Wireless enterprise access point controller

Hide thumbs Also See for WEC8500:

Table of Contents

RADIUS_SERVER_ID_LIST

6) After enabling the RADIUS server function for accounting, specify the index of

account RADIUS server. The RADIUS server information must be configured in

WEC8500/configure/wlan 1/security# radius-server acct-servers

[RADIUS_SERVER_ID_LIST]

RADIUS_SERVER_ID_LIST

7) After applying the changed configuration, exit the security configuration mode.

WEC8500/configure/wlan 1/security# apply

WEC8500/configure/wlan 1/security# exit

8) To check the configuration information, execute the following command.

WEC8500/configure# show wlan security summary

9) To check configuration information, execute the 'show wlan security summary'

Configuration using Web UI

In the menu bar of <WEC Main window>, select <Configuration> and then select the

<WLANs> menu in the sub-menus.

1) Select a WLAN ID to change in the WLANs screen and go to the <Security> 

<Radius> tab. For details about configuration, refer to the section 5.3.3.

2) Click the <L2> tab.

RADIUS server ID list (Up to 3 IDs can be configured.)

Figure 143. Dynamic WEP Configuration Window

CHAPTER 5. WLAN Management

page 260 of 689