1.4.3.1
Configuration of Distributed Clustering Service
The configuration of distributed clustering is to install each WEC8500/WEC8050 in a
building or a local site according to its capacity. This option can be used when there is no
integrated backbone configuration in a site or networks are separated for each building. It is
suitable for a site where several buildings are apart from each other.
An example of service configuration diagram is shown in the below figure.
DHCP
WEC8500
(building-1)
PoE switch
W-EP AP
Figure 13. Example of W-EP Wireless LAN System Configuration for Distributed Clustering Service
© SAMSUNG Electronics Co., Ltd.
AAA
WEM
Loc
server
server
Access switch
CHAPTER 1. Access Point Controller System Overview
Internet
Firewall
SBC
Backbone
switch
IP-PBX
APC Clustering
PoE switch
W-EP AP
PSTN
PRI
IP-PBX Media G/W
WEC8500
(building-2)
Access switch
page 36 of 689