CHAPTER 5. WLAN Management
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Access Points> menu in the sub-menus. In the Access Points screen, select an AP to
change and go to the <Remote AP> tab.
Select the WLAN set with tunneling and enter the split ACL before clicking the <Add>
button.
Figure 136. Split ACL Configuration Window of WLAN Allocated to AP
Select the WLAN set with local bridging and then enter IF Group/ACL/Pre-Auth. ACL
before clicking the <Add> button.
Figure 137. IF Group/ACL/Pre-Auth.ACL Configuration Window of WLAN Allocated to AP
© SAMSUNG Electronics Co., Ltd.
page 246 of 689