Using Web Ui - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual

2.2 Using Web UI

2.2.1 Web UI Connection
To use the WEC, i.e. Web UI of APC system, the IP address of ethernet port must be set up.
When connecting to the IP address of APC ethernet port in a web browser, the below login
window is displayed. Log in using a default connection account 'samsung'.
Note: You must first change the default password via CLI connection.
Note: WEC 8050 does not have a Management Port. We need to setup one of the 4
Ethernet ports as a Management port by CLI connection (Baud rate: 115200, Uncheck all
Flow Control settings).
Example:
WEC8050# configure terminal
WEC8050/configure#
WEC8050/configure/interface ge4#
WEC8050/configure/interface ge4#
WEC8050/configure/interface ge4#
WEC8050# save local
Samsung Electronics America
Figure 17. Web UI Connection Window
interface ge4
no switchport
ip address 192.168.1.2/24
end
Version 5.2
page 42 of 533