Figure 133. Mcs By Wlan: 802.11A/N/Ac Configuration Management Window - Samsung WEC8500 Operation Manual

5) Configure the 802.11ac Modulation and Coding Scheme (MCS) rate. Only 5G
bandwidth for 802.11ac MCS is configurable.
WEC8500/configure/wlan 1/80211a# mcs-11ac num-ss 2/3
enter the maximum MCS(7~9) for 1 spatial stream(s): 7
the maximum MCS : 7
enter the maximum MCS(7~9) for 2 spatial stream(s): 7
the maximum MCS : 7
enter the maximum MCS(7~9) for 3 spatial stream(s): 7
the maximum MCS : 7
[Wlan:1] Radio : 5GHz, number of SS: 3, max mcs : 7, 7, 7 Enable
6) You can check the configuration with the 'show wlan detail #' command.
WEC8500# show wlan detail 1
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<WLANs> menu in the sub-menus. Select the WLAN ID to change in the WLANs screen
and move to the <802.11a/n/ac> or <802.11b/g/n> tab depending on the bandwidth.

Figure 133. MCS by WLAN: 802.11a/n/ac Configuration Management window

© SAMSUNG Electronics Co., Ltd.
CHAPTER 5. WLAN Management
page 242 of 689