Chapter 2. Basic System Configuration - Samsung WEC8500 Operation Manual

CHAPTER 2.
Configuration
In this chapter, the basic system configuration using web and Command Line Interface
(CLI) is introduced and how to use CLI and Web UI is described.
2.1 Basic System Configuration
2.1.1 CLI Connection
Connecting to APC using CLI is as follows:

Direct connection to the system console port

Telnet or SSH connection through an Ethernet port
When the booting of APC is completed, log into the system as follows:
1) For the first connection, log in using ID: 'samsung' and Password: 'samsung'.
USERNAME : samsung
PASSWORD : samsung
THIS IS YOUR FIRST LOGIN AFTER USER ACCOUNT HAS BEEN CREATED.
YOU MUST CHANGE YOUR PASSWORD.
ENTER LOGIN PASSWORD
ENTER NEW PASSWORD
CONFIRM NEW PASSWORD
PASSWORD SUCCESSFULLY CHANGED
WEC8500 #
2) After the first login, you must change the password. Use the changed password for the
next login. New password must be more than 8 character and contain at least one
alphabet/numeric/special letters.
The default ID of APC is set to 'samsung' that has an administrator privilege.
© SAMSUNG Electronics Co., Ltd.
Basic System
: samsung
: ********
: ********

CHAPTER 2. Basic System Configuration

page 41 of 689