2.2.3
Managing Operator Account
To add a operator account in Web UI, follow the below procedure.
In the menu bar of <WEC Main window>, select <Administration> and then select
<Local Management Users> menu in the sub menu. The subtree shows the <APC> and
<AP> menu items. Select <APC>.
You can add or delete a operator account in the WEC.
1) To add an account, click the <Add> button.
2) Enter an item according to each parameter description, and click the <Apply> button.
ID: Username to add
PASSWORD: User's initial password
CONFIRM PASSWORD: Re-enter the initial password
LEVEL: User privilege
1 (Administrator): Administrator privilege that allows to execute all the
commands
2 (Operator): Can change system configuration.
3 (Monitor): Can retrieve system status.
4 (Lobby Ambassador): Temporary user
© SAMSUNG Electronics Co., Ltd.
Figure 19. Operator Account Management Window
Figure 20. Operator Account Addition Window
CHAPTER 2. Basic System Configuration
page 48 of 689