Wec8500/Configure# Apc; Ap Registration (Auto Discovery) Configuration - Samsung WEC8500 Operation Manual

4.1.4

AP Registration (Auto Discovery) Configuration

The APC provides the AP auto-discovery function that automatically registers APs in the
same network without having to configure any settings in advance. To configure the
function, execute the following commands.
Configuration using CLI
1) Go to configure  apc  capwap of CLI.
WEC8500# configure terminal

WEC8500/configure# apc

WEC8500/configure/apc # capwap
WEC8500/configure/apc/capwap #
2) Configure the automatic registration function.

auto-discovery
3) Configure an AP group that will be working after AP automatic registration.

auto-discovery-ap-group [AP_GROUP_ID]
Parameter
AP_GROUP_ID
4) To check the configured information, use the 'show apc capwap summary' command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <General> menu from the sub-menus.
After entering a configuration in the AP Registration of the window, click the <Apply>
button.
© SAMSUNG Electronics Co., Ltd.
ap-group that will be working after AP automatic registration
Figure 84. AP Registration Method Setup Window
CHAPTER 4. AP Connection Management
Description
page 163 of 689