4.2.8.5
Restarting and Upgrading AP
After downloading the AP package, APs in the remote group are restarted so that they can
run on the upgraded version.
Configuration using CLI
Example:
WEC8500# configure terminal
WEC8500/configure# ap-group rUpgrade
WEC8500/configure/ap-group rUpgrade# remote
WEC8500/configure/ap-group rUpgrade/remote# reboot upgrade
CLI for checking configuration:
WEC8500# show remote-ap-group upgrade config rUpgrade
================== Remote Ap Group Upgrade Config =================
Group Name
Enable
Type
Mode
Path
PortNum
MAXretries
ForceOption
weafama
weafamb
WEC8500# show remote-ap-group upgrade list rUpgrade
/* (RC/FR/RC) : RetryCount/FailReason/RebootCause
AP_ID
Model Version(config/current) Status(RC/FR/RC)
1
WEA303i
2
WEA312i
3
WEA303i
© SAMSUNG Electronics Co., Ltd.
: rUpgrade
: Enable
: Default
: FTP
: package/ap
: 21
: 3
: Disable
: ap_1 (APID:1, IP:10.10.10.160)
: weafama_1.7.0.U.bin (1.7.0.U)
: (APID:0, IP:0.0.0.0)
: ()
Remote/1.7.0.U
Remote/1.7.0.U
Remote/1.7.0.U
CHAPTER 4. AP Connection Management
Success( 0/ 0/128) MasterApCfg
Success( 0/ 0/146) -
Success( 0/ 0/146) -
MasterAp
page 229 of 689