Figure 3. Wec8500 Interface-Front/Back; Figure 4. System Led Configuration; Apc Configuration And Functions - Samsung WEC8500 Operation Manual

1.3

APC Configuration and Functions

1.3.1 WEC8500 Configuration and Functions
The Configuration and the purpose of each item of WEC8500 are as follows:
Ground hole
System LED
System LED indicates the various statuses of system. Each LED displays the following
information.
LED
SYS
FAN (fan module)
PS1 (power module 1)
© SAMSUNG Electronics Co., Ltd.
Console port
System LED Management port

Figure 3. WEC8500 Interface-Front/Back

Figure 4. System LED Configuration

Status
Green
Orange
Red
Green
Orange
Red
Green
Red
CHAPTER 1. Access Point Controller System Overview
1G Optic port
Description
The system is operating normally
The system is now booting
Preparing the system for booting
The installed FAN module is operating normally
The system is now booting
Fan module fault has occurred
Normal operation of installed power module 1
Power is turned off or a fault occurred while the power
module 1 is installed.
USB port
10G Optic port
Power Module
page 27 of 689