Figure 111. Ap Snmp V1/V2C Community Configuration Window - Samsung WEC8500 Operation Manual

Configure the user information of the AP.

Use r [USER NAME] [AUTHENTICATION TYPE] [AUTHENTICATION KEY]
[PRIVATE PROTOCOL] [PRIVATE KEY]
Parameter
PORT NUMBER
COMMUNITY NAME
USER NAME
AUTHENTICATION TYPE
AUTHENTICATION KEY
PRIVATE PROTOCOL
PRIVATE KEY
3) Use the 'show snmp ap' command to retrieve the agent information configured for the
AP.
Configuration using Web UI
In the menu bar of <WEC Main Window>, select <Administration>, select <AP> in the
submenu, and then select <v1/v2c Community> or <v3 User> to configure the SNMP
agent information.
© SAMSUNG Electronics Co., Ltd.
This is the SNMP port number.
This is the SNMP Read Only or Write Only Community name.
This is the SNMP user name.
This is the SNMP authentication type. Either of the following two
can be selected:
- MD5
- SHA
A number in the range of 8 to 20 can be entered.
Either of the following two can be selected:
- DES
- AES
A number in the range of 8 to 20 can be entered.

Figure 111. AP SNMP v1/v2c Community Configuration Window

Figure 112. AP v3 User Configuration Window
CHAPTER 4. AP Connection Management
Description
page 211 of 689