Figure 149. Option 82 Configuration (1) - Samsung WEC8500 Operation Manual

Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <Interfaces> menu in the sub-menus. In the interface, you can see the
page where you can change the Option 82.
Select an item in the list and perform detail configuration.
After unchecking the GLOBAL USE check box in the DHCP part, configure OPTION 82
STATE and OPTION 82 TYPE and then click the <Apply> button.
In the OPTION 82 STATE, configure Enable/Disable for Option 82 and configure ap-mac,
ap-mac-ssid, or ap-ethermac for OPTION 82 TYPE.
© SAMSUNG Electronics Co., Ltd.

Figure 149. Option 82 configuration (1)

Figure 150. Option 82 configuration (2)
CHAPTER 5. WLAN Management
page 273 of 689