You can configure various functions such as interface group and SSID, etc.
The configurations available in the General tab are as follows:
INTERFACE GROUP: Configures an interface group.
RADIO AREA: Configures a radio area.
CAPWAP TUNNEL MODE/LOCAL VLAN: Configures the local switching function.
SUPRESS SSID: Enables or disables the function.
AAA OVERRIDE: If the WLAN is enabled with the device authentication function
using a AAA server, the AAA-override function can be enabled so that the user-
specific settings configured in the AAA server are applied with priority over the APC
settings.
MAXIMUM ALLOWED STATIONS: Limits the number of users per WLAN.
ADMIN STATUS: Enables or disables the function.
5.1.2
WLAN Additional Configuration
Each wireless terminal can receive a differentiated service according to the WLAN
configuration. The procedure of configuring the WLAN additional function is as follows.
Configuration using CLI
1) Go to configure wlan configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wlan 1
WEC8500/configure/wlan 1
2) If the WLAN is enabled with the device authentication function using a AAA server,
the AAA-override function can be enabled so that the user-specific settings configured
in the AAA server are applied with priority over the APC settings.
WEC8500/configure/wlan 1# aaa-override
3) Determine whether to configure the Guest service.
guest-flag
4) Configure a VLAN ID to use locally.
local-vlan [VLAN_ID]
Parameter
VLAN_ID
© SAMSUNG Electronics Co., Ltd.
CHAPTER 5. WLAN Management
Description
VLAN ID (range: 1-4094)
page 234 of 689