Chapter 2. Basic System Configuration - Samsung WEC8500 Operation Manual

WEC8500/8050 Operation Manual
CHAPTER 2.
Configuration
In this chapter, the basic system configuration using web and Command Line Interface
(CLI) is introduced and how to use CLI and Web UI is described.
2.1 Basic System Configuration
2.1.1 CLI Connection
Connecting to APC using CLI is as follows:

Direct connection to the system console port (Baud rate: 115200, Uncheck all Flow
Control settings)

Telnet or SSH connection through an Ethernet port (Telnet and SSH are disabled by
default. You have to manually enable them from the GUI.)
When the booting of APC is completed, log into the system as follows:
1) For the first connection, log in using ID: 'samsung' and Password: 'samsung'.
USERNAME : samsung
PASSWORD : samsung
THIS IS YOUR FIRST LOGIN AFTER USER ACCOUNT HAS BEEN CREATED.
YOU MUST CHANGE YOUR PASSWORD.
ENTER LOGIN PASSWORD
ENTER NEW PASSWORD
CONFIRM NEW PASSWORD
PASSWORD SUCCESSFULLY CHANGED
WEC8500 #
2) After the first login, you must change the password. Use the changed password for the
next login.
Samsung Electronics America
Basic System
The default ID of APC is set to 'samsung' that has an administrator privilege.
: samsung
: ********
: ********
Version 5.2
page 37 of 533