WEC8500/8050 Operation Manual
1.4.3.1
Configuration of Distributed Clustering Service
The configuration of distributed clustering is to install each WEC8500 in a building or a
local site according to its capacity. This option can be used when there is no integrated
backbone configuration in a site or networks are separated for each building. It is suitable
for a site where several buildings are apart from each other.
An example of service configuration diagram is shown in the below figure.
DHCP
WEC8500
(building-1)
PoE switch
W-EP AP
Figure 13. Example of W-EP Wireless LAN System Configuration for Distributed Clustering Service
Samsung Electronics America
Loc
AAA
WEM
server
server
Access switch
Internet
Firewall
SBC
Backbone
switch
IP-PBX
APC Clustering
PoE switch
W-EP AP
Version 5.2
PSTN
PRI
IP-PBX Media G/W
WEC8500
(building-2)
Access switch
page 32 of 533