Printing Format Selection - Omega RD2800 Series User Manual

9. PRINTING
This selection is only applicable to the printing format function (option). Four types of analog printing format are
available.
1
Types of Printing Format
Before the selection, the programming of the
desired format is required. See Section 14.
The default is the standard format (  ).
2
Selection Flow Chart
<Example> From Standard printing to Zone printing
Operation screen
[Check]
  
①
[To be ready for programming]
  
Cursor
[Selecting format]
  
YES
Programming screen for the selected format appears.

9.5 Printing Format Selection

＋
SHIFT DISP
  
③
② ④
SET
END
  

℃
  
Zone
ENTRY
"Standard" selected?
NO
SET
＋
SHIFT
END
Stored
－５１－
Types of format and programming
Types
(1) Standard ()
(2) Automatic range shift ()
(3) Compressed/expanded ()
(4) Zone ()
Reference 1
DISP
Decimal point appears in the current
format.
(1)   : Standard
(2)   : Automatic range shift
(3)   : Compressed/expanded
(4)   : Zone
Reference 2
1. To store the standard format;
Press
ENTRY
2. To store the format other than the
standard:
Press
and SET
END
Reference 3
The selected format is stored into
memory. The trace printing is
executed in the stored format.
(Programming change mark
printed.)
Programming
Not required
Section 14.1
Section 14.2
Section 14.3
Printing format check
Storing procedure
key.
SHIFT
ENTRY
and then press
simultaneously.
Storing
is