11. OTHER PROGRAMMING
4
Programming Mode
Scale (max. 11 digits by left-justify) Unused digits are filled with spaces
Min. value
(within 5 digits)
Scale value to
print 0%
5
Programming Flow Chart
<Example> –100 to +100 for CH 3
Operation screen
[Check]
Channel
[To be ready for programming]
Cursor
[Selecting channel]
Channel
[Programming scale]
YES
Error message appears?
Any key other
than
SHIFT
YES
Programming other channels?
to
-
SHIFT
+
(-)
4
+
SHIFT
SCALE
SET
END
3
UNIT
Various
keys
※
Scale
ENTRY
NO
Temporarily stored
NO
SET
+
SHIFT
END
Stored
Ref. 3
-58-
11.2 Scale
Max. value
(within 5 digits)
Scale value to
print 100%
Remarks
(1) Select the channel to program to
"none" with
DISP
(2) Press
simultaneously to clear and execute
Ref. 1
[temporarily storing] and [storing].
* If a channel is programmed by a
numeric value, not by up and down
keys, and cleared, the channel before
programming change is programmed
to scale "none".
Note) The scale of the channel, of which
Remarks
scale was programmed to "none", is
reflected by the printing range being
programmed in the [Range/Printing
Ref. 2
range]. Tag and alarms are cleared
(not programmed).
Reference 1
Press
the programmed scale of other
channels.
Reference 2
• Adding/deleting decimal point
Move the cursor to the right:
・
CLOCK
• Programming "to":
• Space:
Reference 3
Store
parameters into the memory. (A
programming change mark is printed.)
* Fill unused digits with spaces.
To clear (none) the scale
programmed
or
.*
%
/
0
and
SHIFT
CLEAR
Other channels check
or
to check
/
%
Various keys
SPACE
→ Numeric keys
or
COPY(=)
-
SHIFT
+
(-)
SPACE
COPY(=)
Storing
the
[temporarily
stored]