Programming Zone Printing - Omega RD2800 Series User Manual

14. PRINTING FORMAT
This programming display only appears for the printing format (option). This programming is to print the printing
area by dividing it into 2 to 4 zones. ( RD200: 2 zones only)
1
Zone Printing
The printing area is divided into two zones (RD200) or
four zones (RD2800) and the printing zone can be
selected. This function is effective when printings overlap
each other.
(1) The printing zone can be selected for each channel.
(2) The printing range for each zone is the programmed
printing range in the [Range/Printing range].
(3) The followings are printing position (mm) at the
number of zone.
• RD200
Zone No. 1 0 to 45
Zone No. 2 55 to 100
• RD2800
Zone
Zone
No.1
2 0 to 81 99 to 180
3 0 to 54 63 to 117 126 to 180
4 0 to 36 45 to 81
2
Programming Mode
1) Screen 1 (Printing format check)
   
Automatic
Standard
range shift
Dots appear at the selected format.
SET
By pressing , the dots disappear and the
END
cursor appears instead.
2) Screen 2 (Programming number of zones)
... Displays in RD2800 only
Programming mode for zone printing

  
(Note) For RD200 (2 zones only), Screen 2 is
skipped and Screen 3 appears.
Zone Zone Zone
No.2 No.3 No.4
99 to 135 144 to 180
 
Zone
Compressed/expanded
Number of zones
(2 to 4)
－９６－

14.3 Programming Zone Printing

Example of zone programming
<To divide into 2 zones with a 4-pen type
model>
Channel
1
1st area
(Printing range)
0
Printing position (mm)
3) Screen 3 (Programming channel for zone No.1)
Zone No.1


Cursor Channel programming for zone No.1
4) Screen 4 (Programming channel for zone Nos. 2 to 4)
Zone Nos. 2 to 4


Cursor
(Note) The programming for zones No. 3 and 4
are for RD2800 only.
Channel
3
2 4
2nd area
(Printing range)
180
81 99


: For sequential channel

: For non-sequential channel

Channel programming for zone Nos.2 to 4

: For sequential channel

: For non-sequential channel