Tags - Omega RD2800 Series User Manual

11. OTHER PROGRAMMING
Tags up to 9 digits can be assigned for digital data printing and scale printing.
2
Press and simultaneously to display the [Tag] programming screen. The default is no programming
SHIFT
TAG
of tags.
(Scale printing)
1
Programming Mode
Note) The default is no programming of tags. The following figure is an example of 9-digit tag programmed.


(Fixed)
*1
*1: Tag character
The character at the digit where the digit number is pointed by the cursor is displayed.
*2: Digit No. of tag character
A digit No. 1 to 9 is displayed by pressing
<To decrease the digit No.>
Press and
SHIFT
new digit No.
If the scale is cleared in a channel; the tag of this channel is deleted. Reprogram it if necessary.
Example of tag printing (RD200)
  
Digit No. of tag character *2
(Up to 9 digits.)
(Numeric numbers (1 to 9) appear for the digit not programmed by pressing
0
simultaneously to clear the digit No. and press
CLEAR
If clear is stored in the scale mode;
－７１－

11.9 Tags

(List printing)
°F
.
.)
°F
for reprogramming a
°F