Configuration; Decimal Point Selection; Figure 5-1 Display Board Jumper Locations - Omega DP301AN User Manual

5.0

CONFIGURATION

Select the desired configurations from the following charts.
Install jumpers and open/close solder switches as indicated.
Remove all push-on jumpers not used.
5.1

DECIMAL POINT SELECTION

Decimal Point
1.999
19.99
199.9

Figure 5-1 Display Board Jumper Locations

Alternate Decimal Point Configuration Using
S1
Main Board Connector J1
A
C
B
Connect K/9 to 6
Connect J/8 to 6
Connect H/7 to 6
10