Power Terminals - Omega RD2800 Series User Manual

4. CONNECTIONS
1 Power and protective conductor terminals

Power terminals

L N
100-240V AC
50/60Hz 60VA MAX
Power supply (voltage, frequency, power consumption)
2 Connection of power terminals
For connection to the power terminals, use a 600 V PVC
insulated cable (IEC 227-3 See "Caution") terminated by
the crimp style terminals with insulation sleeve.
Note) Use the cords approved by the following standards.
(1) IEC 227-3
(2) ANSI/UL817，
(3) CSA C22.2 No.21/49
Be careful with the power
Caution
voltage and noises.
The power voltage of your recorder is
indicated beside the power terminals. Don't
apply any voltage other than the rated
voltage. Otherwise a malfunction may result.
If noise is contaminated in the power
supply, provide a
transformer, etc.
3 Connection of protective conductor
terminal
Make sure to connect this terminal to the protective
conductor of the power supply facility. For this
connection, use a cable terminated by the crimp
style terminals with insulation sleeve.
• Grounding wire: Copper wire 2 mm
Warning
mark at power terminals
A voltage of 100 to 240 VAC is applied to the
power terminals after connections. Be sure to
mount the power terminal cover to prevent an
electric shock.
4.3 Power Terminals
Protective conductor
terminal
noise reduction
2
or more
－１５－
Warning
Turn off the power supply.
Make sure to turn off the power supply
before the connections to the power and
protective conductor terminals for preventing
an electric shock.
L/N indication of power
Remarks
terminals
This indication conforms to the CSA
standard, Canada. The live side of the
single-phase AC power
indicated as L, and the neutral side is
indicated as N. Observe the L and N
connections for obtaining satisfactory
performance.
Ｌ Ｎ
Mount the terminal cover
after connections.
(Illustration below)
A copper wire with
diameter of2 mm
(green/yellow)
Make sure to connect to
the protective conductor of
the power supply facility.
600 V vinyl insulated cable
Power supply
supply is
2
or more