Digital Data Printing - Omega RD2800 Series User Manual

9. PRINTINGS
The measured value at the moment
Operation screen
DATA
PRINT
Digital data printing starts.
YES*
Interrupt?
REC
→
ENTRY
NO
ON/OFF
Digital data printing ends.
(Approx. 5 min. at 20 mm/h)
* With this procedure, the printing
operation turns off.
REC
Press and
ENTRY
ON/OFF
turn it on.
<99 mm/h or slower>
(Note) The above examples are for RD200. They are the same for RD2800.

9.2 Digital Data Printing

DATA
pressed is digitally printed with the plotter pen.
PRINT
(1) Press
measured value at the moment
→
ENTRY
(Note) When
(Note)
• Printing mode is different depending on the chart speed.
Chart speed
0 to 499mm/h Analog printing is continued without interruption.
500 mm/h or
(2) For interrupting the printing, press
press
the printing operation is turned off. For turning on the printing
operation, press
(3) When the digital data printing completes, your recorder returns
to the normal operation.
again to
Remarks
(1) RECORD ON status lamp is not lit.
(2) KEY LOCK
Example of Digital data printing (4-pen type)
－４７－
DATA
and then press
PRINT
DATA
is pressed,   appears
PRINT
for about 5 sec. Press
ENTRY
Analog printing is interrupted and data printing
more is started.
. Your recorder returns to the normal operation but
ENTRY
REC
and then press
ON/OFF
Digital data printing cannot be executed in the
following conditions.
status lamp lights.
<100 mm/h or faster>
ENTRY
. Digital printing of
DATA
pressed starts.
PRINT
while this message appears.
Printing mode
REC
and then
ON/OFF
again.
ENTRY