Printing On/Off And Chart End Detection - Omega RD2800 Series User Manual

6.
BASIC OPERATION
1 Printing On/Off
REC
Every time pressing
ON/OFF
sec., the printing function switches to on or off.
Printing ON
→
REC
ON/OFF
Printing OFF
→
REC
ON/OFF
Printing status when turning on
Reference 1
the power supply
When turning on the power supply, the printing
maintains the condition (on or off) when it was
turned off last time.
Up and down of pens
Reference 2
(1) When the printing is turned off, each pen
lifts up automatically. Even if the power is
turned off in this condition, this pen
position is maintained.
(2) When the chart cassette is pulled out,
each pen lifts up. If the printing has been
turned off when pulling out the chart
cassette, each pen has already been lifted
up and it maintains its position.
2 Printing Operation
The table below explains the printing operation
when the printing is on or off.
Operation
Chart feeding
Trace printing
(Cartridge pen)
Digital data printing
(Plotter pen)
Up and down of pens

6.2 Printing ON/OFF and chart end detection

then within 5
ENTRY
Status
lights.
RECORD ON
Remarks 1
ENTRY
Status
goes out.
RECORD OFF
Remarks 2
ENTRY
ON OFF
Execute Stop
Up where it
Execute
is
Up at
Execute standby
position
Down Up
－２８－
Status display when printing is on
Lights when the printing is on.
No printing on/off operation executed
Remarks 1
(1) The printing on/off operation is not executed
when the status KEY LOCK lights. For its
cancellation, see Section 11.13.
(2) The printing on/off operation is not executed
when the printing is turned off by the remote
contacts signal (option). See Section 13.1.
Remarks 2 Execution by pressing
        
(1)
REC
when pressing
ON/OFF
during this display to execute the printing on/off
operation.
(2) The printing on/off operation cannot be
executed by pressing
goes out.
In such case, press
again.
3
Chart End Detection
When the chart end is detected during the printing
is on, the printing is switched to off and
CHART END blinks. Each pen lifts up
automatically and the printing is stopped.
For continuing the printing, refer to "Chart loading"
in Section 5.1 and 5.2.
key
ENTRY
appears for about 5 sec.
key. Press
ENTRY
after this display
ENTRY
REC
and then
ENTRY
ON/OFF