List Printing - Omega RD2800 Series User Manual

9. PRINTING
2
List 2 Printing
Operation screen
SHIFT

[List No. selection]

Cursor
ENTRY
List 2 printing starts.
YES*
Interrupt?
REC
→
ENTRY
ON/OFF NO
List 2 printing ends.
(Approx. 30 min. for printing)
* With this procedure, the printing operation turns
REC
off. Press and then press
ON/OFF
to turn it on.
List 2 printing cannot be executed
Remarks
in the following conditions.
(1) RECORD ON status lamp is not lit.
(2) KEY LOCK
status lamp lights.
Chart speed does not affect this operation.
Chart paper forwards at a fixed speed.
Operation during printing
Reference
Trace printing with a cartridge pen is not
interrupted. Other functions are continued
without being
3
List 3 Printing
Move the cursor to "3" at the [List No. selection] and execute the same procedure as item
programmed parameters are printed.

9.3 List Printing

DISP
9
＋
LIST
(1)
or
℃
(2)
→
(3) (4)
ENTRY
(5)
(6)
ENTRY
again
interrupted.
－４９－
(1) Press SHIFT and
then press .
ENTRY
(2) The selection screen from [List 1] to [List 3]
appears. Move the cursor to "2".
is pressed,  
(3) When ENTRY
appears for about 5 sec. For execution, go to
(4).
procedure For no execution, press
(4) Press to start "List 2" printing. The
ENTRY
cartridge pen moves to the end of the left side and
the chart paper forwards slightly.
(5) For interrupting the printing, press
simultaneously. Your recorder returns to the normal
operation but the printing operation is turned off.
For turning on the printing operation, press
ENTRY
and then press
(6) When the list printing completes, your recorder
returns to the normal operation.
List 2 printing details
(1) Year/month/day, Time
(3) Alarm outputs
(5) Message
(7) Remote contacts
(Note) For the remote contacts (option), which can
program 3 speeds (No.1 to No.3), is added,
all programmed 3 speeds are printed.
Example of the List 2 printing
(Note) The above example is for RD200. It is the same for
RD2800.
9
simultaneously, and
LIST
.
DISP
REC
and ENTRY
ON/OFF
REC
ON/OFF
again.
(2) Chart speed (Note)
(4) Time axis sync
(6) Operation record
(8) Mathematics
2 . All of the