Chart Paper Loading (Rd2800) - Omega RD2800 Series User Manual

5. INSTALLATION
1 Chart Paper Cassette Removal
1) Open the door.
2) Remove the chart paper cassette.
(1) Pull the grip of the chart paper cassette and
take the chart paper cassette slightly out of
the internal unit. (Pens lift up.)
(2) Pull the grip slowly to take the chart paper
cassette out of the internal unit completely.
Chart paper cassette
Be careful with the corners
Caution
of the rear stripper plate
The sharp corners of the rear stripper plate
help to feed the chart paper smoothly. Be
careful not to cut your fingers when loading
or replacing the chart paper.
Don't remove the chart paper
Caution
cassette during printing.
Don't remove the chart paper cassette
during printing by a plotter pen. The
cassette may hit 1st pen during the
automatic pen lift-up function executed.

5.2 Chart Paper Loading (RD2800)

Grip
Guide
Guide rail
－２３－
2 Chart Paper Loading
1) Open the chart paper holders.
Open the chart paper guide and the stripper
plate.
Chart
paper
guide
2) Prepare a chart paper.
Shuffle both end of the chart paper to prevent
two or more chart papers fed being together.
3) Put it into the chart paper housing.
The shapes of the sprocket holes on the right and
left sides are different. The right side holes are an
elliptical shape.
Printing side (Caution in red)
Drum
Stripper plate
Caution
Open from
here.
Sprocket holes (circular)
Sprocket holes
(elliptical)
Chart paper
housing