Alarm Display And Printing - Omega RD2800 Series User Manual

10. OPERATIONS
1
Display of Alarm Activation
The alarm activation information can be checked in the operation screen.
1) Measured value display screen
<Ex.> Alarm activated at CH 1 in 3-pen type
(2)
(1)
(Note) The above example is for RD200. It is the same for
RD2800.
2) Alarm display screen
<Ex.> Alarm activated at CH 1 in 3-pen type
(2)
(1)
(3)
(Note) The above example is for RD200. It is the same for
RD2800.
2
Alarm Activation/Reset Printing
Alarm activation and reset are printed on the right side of the chart paper.
1) Printing format when an alarm activates
1 3 : 5 9 1 H 1
Printing example of alarm activation

10.3 Alarm Display and Printing

2) Printing format when an alarm is reset
Time
Channel
Type
Level
－５５－
Display in case alarm activated
(1) ALARM status lamp lights.
(2) The measured value of the channel in
alarm blinks.
(To cancel blinking)
Press ENTRY . The measured value is
displayed steadily.
Display in case of alarm activated
(1) The character display shows "  ".
(2) The alarm type at the level, of which
the alarm is activated, is displayed for
each channel.
(3) ALARM status lamp lights.
(Note) If no alarm activates, the alarm
display screen is not displayed
even when DISP
1 4 : 0 5 1 - 1
Printing example of alarm reset
is pressed.
Time
Channel
Hyphen
Level