Switching Operation Screen (Rd200) - Omega RD2800 Series User Manual

6.
BASIC OPERATION
For RD200, three operation screens, (1) measured value screen, (2) clock screen and (3) alarm activation screen,
are available. Each time
any of these screens.
Measured value
screen
(Note) The alarm activation screen is only available when an alarm activates (shown by dotted lines). When
no alarm activates, this screen is skipped.
1 Measured value screen
The screen differs on Model No. (number of pens).
1) 1-pen type (CH 1)
Ch 1
3) 3-pen type (CH 1 to 3)
Ch 1 Ch 2
2 Clock screen
Day
Year Month
3 Alarm activation screen
This screen is only available when an alarm
activates.
For alarm types, see Section 11.5, item

6.4 Switching Operation Screen (RD200)

is pressed, the screen switches. Bargraphs for analog indications are displayed in
DISP
DISP
Clock screen
Time Chart speed
Ch 3 Chart speed
Time Chart speed
1 .
－３０－
DISP
Alarm activation
screen
2) 2-pen type (CH 1 and 2)
Ch 1 Ch 2
4) 4-pen type (CH 1 to 4)
Ch 1 Ch 2
Screen when turning on the
Reference
power supply
When the power supply is turned on, the
measured value screen appears.
Explanation for alarm activation
In each channel, the alarm level 1, 2, 3 and 4
are allocated to the digits from the left end.
The alarm type shall be displayed only at the
digit where an alarm activates.
ｂ
Ｈ
DISP
Time Chart speed
Ch 3 Ch 4
Alarm type at level 1
Alarm type at level 2
Alarm type at level 3
Alarm type at level 4