Message - Omega RD2800 Series User Manual

11. OTHER PROGRAMMING
Messages are printed from (1) key operation or (2) remote contacts signal*. A message up to 15 digits and 5
different messages (No.1 to No. 5) can be programmed. Press
or more to display the [Message] programming screen.
* This function is only available in the remote
contacts (option). See Section 13.1.
1
Programming Mode
Note) The default is no programming of messages. The following figure is an example of 8-digit message
programmed for No.1.


(Fixed)
*1
*1: Massage character
The character at the digit where the digit number is pointed by the cursor is displayed.
*2: Digit No. of message character
A digit No. 1 to 15 is displayed by pressing
<To decrease the digit No.>
Press and
SHIFT
CLEAR
new digit No.
  
No.
Digit No. of message character *2
(1 to 5)
(Up to 15 digits.)
(Numeric numbers (1 to 15) appear for the digit not programmed by pressing
0
simultaneously to clear the digit No. and press
－７３－

11.10 Message

6
0
and simultaneously for 3 seconds
A～Z
CLEAR
Example of message printing
.
°F
°F
.)
°F
for reprogramming a