Programming Errors And Remedial Measures - Omega RD2800 Series User Manual

7. PROGRAMMING
An error for the programmed parameter is judged when pressing
procedures.
1
Error Judgement Flow Chart
Common programming
parameters to all channels
Ready for programming
Programming
Keys other than
ENTRY
SHIFT
Error occurred?
YES
(A long tone)
NO
Stored
2
Type of Errors and Error Display
If a programmed parameter is in error, a long tone (approx. 0.5 sec.) sounds and no storing (or temporarily storing)
is executed.
Error type
 
Display
Programmed parameter format is in error.
Details [1234] was programmed to [12-34] or the like,
for example.
3
Remedial measures when an error occurs
If any key other than
SHIFT
reprogramming can be executed. Reprogram by entering correct value.

7.5 Programming Errors and Remedial Measures

SET
END
Numeric and other keys
An error is
judged at
this stage.
(A short tone)
Format error
is pressed, it returns to the programmed parameter display. The cursor appears and
－３８－
during [Storing] or [Temporarily storing]
ENTRY
Programming parameters for
each channel
Ready for programming
Programming
Keys other than
SHIFT
Error occurred?
YES
(A long tone)
Temporarily stored
Programming other
YES
channels?
NO
Stored
→  
Blinks
A numeric value out of programming range
was programmed.
SET
END
Numeric and other keys
ENTRY
An error is
judged at
this stage.
NO
(A short tone)
+
SET
SHIFT
END
Programming error
→
Blinks