Printings; Printing Types And The Details - Omega RD2800 Series User Manual

9. PRINTINGS

Printing comprises trace printing and digital printing. The fixed-time printing and trace printing are executed even if
any operation is not programmed.
1

Printing Types and the Details

Printing type
Trend printing is executed for each pen (channel)
Trace printing
(Cartridge pen)
Fixed-time
The following details are printed on the fixed time.
printing (1) Year/Month/Day (2) Time (3) Time line (4) Chart speed (5) Scale, Engineering unit, Tag
Measured values are printed on the trace printing with programmed intervals. The
Periodic
printing starts from the programmed start time line. The printing mode is different
data printing
depending on chart speed.
Digital data Measured values are printed on the trace printing. The printing mode is different
printing depending on chart speed.
List 1 Major parameters (Range/Printing range, Scale, Subtract printing, Periodic data
printing printing) are printed as a table.
List 2 The parameters (such as time axis synchronizing, message, items relating to
printing options) other than those involved in List 1 are printed as a table.
List 3
All parameters (List 1 + List 2) are printed as a table.
printing
Message Message is printed on the right side of the chart paper by selecting the
printing programmed message No.
Alarm Alarm details (time, alarm points, alarm type) are printed on the right side of the
printing chart paper when an alarm activates or an alarm is reset.
(1) When the time axis synchronization (POC) is switched on or off, its time, mark
Time axis
(*), and ON or OFF are printed on the right side of the chart paper.
sync. mark
(2) When it is ON, a mark (*) is printed to the right of the time print of fixed-time
printing
printing.
Power-on Year/Month/Day and time are printed on the left side of the chart paper when the
printing power is turned on.
For the remote contacts (option), it is required to program the "Operation printing
Operation position" and select one of Act 1 to 4 in the "Remote contacts" programming.
printing line (1) Printing line: When a contact signal (on) is applied to the allocated terminal,
and the line is printed by 5 mm to the right of the programmed printing line
Operation position.
printing No. (2) Operation printing No.: Operation printing No. (A to D) is printed at constant
intervals to the left of the programmed printing line position.
Printer
When hardware check is executed by selecting the printer (plotter pen)
check
characters are printed for checking purpose.
printing
9.1 Printing Types and the Details
Printing details
1st pen 2nd pen
Red Green
－４５－
3rd pen 4th pen
Blue Brown
Remarks
⎯
10-1
11-7
9-2
9-3
9-3
9-3
9-4
10-4
9-6
10-1
6-1
13-4
19-2