Installation To A Panel - Omega RD2800 Series User Manual

2. INSTALLATION
Warning
Install your recorder to a panel.
Except portable types, your recorder is designed to install to a panel. Use a panel made of a steel plate of 2
mm to 6 mm in thickness.
RD200
1
Panel cutout size
+1
138
0
2
Installation
(1) Insert your RD200 (pen type) into the panel
cutout from the front of the panel.
(2) Fix your RD200 (pen type) to the panel by the
mounting brackets (screw tightening torque: 1.0
N•m). Attach 2 mounting brackets to the top and
bottom of this instrument.
Panel thickness
(2 to 6 mm)

2.2 Installation to a Panel

• Minimum clearance for
closed- installation
200
(mm)
Mounting bracket
Mounting bracket
－１０－
RD2800
1 Panel cutout size
+1
281
0
2
Mounting method
(1) Insert your RD2800 (pen type) into the panel
cutout from the front of the panel.
(2) Gently screw a mounting screw into the screw
hole of the case (left, right).
(3) Attach the mounting bracket to the case by
putting the mounting screw in the large hole of
the bracket. Slide the bracket downward to
attach it closely to the panel and then tighten
the screw with a wrench (screw tightening
torque: 1.2 N•m).
Mounting screw
Mounting bracket: Slide it
downward and tighten
with a wrench.
Panel
Panel thickness (2 to 6 mm)
• Minimum clearance for
closed- installation
360
(mm)
Mounting bracket