Key Functions - Omega RD2800 Series User Manual

7. PROGRAMMING
1 Functions by Pressing Single Key
Keys Names
Display
DISP
SPACE
Space
COPY(=)
SET
Program
END
Shift
SHIFT
－
Minus
(-)
Decimal
CLOCK
point
0
0
CLEAR
～
to
9
9
LIST
Up
/
Down
%
Left cursor
℃
Right cursor Moves the cursor rightward.

ENTRY
Entry
Printing
REC
ON/OFF
on/off
FEED Feeding
DATA
Data print
PRINT
2 Functions by Pressing Two Keys Simultaneously
Keys
SET
＋
SHIFT
END
－
＋
SHIFT
(-)
0
＋
SHIFT
CLEAR
Alphabetic
6
＋
SHIFT
A～Z
characters
9
＋
List printing
SHIFT
LIST
＋
SHIFT
%
＋
SHIFT
/
＋
SHIFT
°C
＋
SHIFT
°F

7.2 Key Functions

Stops programming and returns to the operation screen. For certain programming items,
holding this key down for 2 seconds or more is required.
(1) Deletes a numeric value or decimal point at an unnecessary digit.
(2) Programs "Blank" in the programming of [engineering unit] or [tag].
Changes from programming mode (confirmation of parameters) to the programmable
condition. The programming lamp lights and the cursor appears at the programmable
leftmost digit.
Press this key first for using the key functions being indicated on the lower case of each
key.
(1) Press these keys for programming a numeric value.
(2) For programming a decimal point, move the cursor to the next digit and press
before entering a numeric value.
(3) For deleting a decimal point, move the cursor to the next digit and press
(1) For items to program by selecting from menu, this key steps the menu forward or
backward.
(2) For items to program parameters per channel in the programming mode
(confirmation of parameters), this key steps the channel No. forward or backward.
Moves the cursor leftward.
(1) Programming items common to channels: Stores the programmed parameter into
memory.
(2) Programming items per channel: Stores temporarily the programmed parameter in
the channel No. selected. Press
(3) Printing on/off, data printing or list printing is executed by pressing this key.
Selects on (enable) or off (disable) of printing. Press
The chart paper is fast fed when holding this key down.
Prints the measured values at the moment the key is pressed digitally on the trace
ENTRY
printing. Press to go this printing active.
Names
End
Stores the programmed parameter, which is temporarily stored, into memory.
To Inserts [～（）] between minimum and maximum values.
Clears (Blanks) the programmed parameter displayed.
Clear
Each time
/
Programmed parameters are printed as a list. Press
active.
% Programs "%" (percent) character.
Programs "/" (slash) character. This is also "=" in the subtract printing
/ (=)
programming mode.
°C
Programs "°C" (degree Centigrade) character.
°F
Programs "°F" (degree Fahrenheit) character.
－３３－
Functions
SET
SHIFT + to store it into memory.
END
ENTRY
Functions
is pressed, characters step in the order of A, B, C .....
CLOCK
SPACE
.
COPY(=)
to go this selection active.
to go this printing
ENTRY