List Printing - Omega RD2800 Series User Manual

9. PRINTINGS
The details of programming such as "Range/Printing range" and "Scale" can be printed as a list with the plotter
pen. As this includes large amount of data and takes time, it enables to divide the data into two and select printing
of "List 1" or "List 2".
List 1: Major parameters .... "Range/Printing range", "Chart speed", "Printing format", etc.
List 2: Parameters other than the above .... "Message", "Time axis synchronization." and "option-related-items"
List 3: All parameters .... "List 1" + "List 2"
1
List 1 Printing
Operation screen
SHIFT
[List No. selection]

Cursor
ENTRY
List 1 printing starts.
YES*
Interrupt?
REC
→
ENTRY
ON/OFF NO
List 1 printing ends.
(Approx. 30 min. for printing)
* With this procedure, the printing operation turns
REC
off. Press and then press
ON/OFF
turn it on.
List 1 printing cannot be executed in
Remarks
the following conditions.
(1) RECORD ON status lamp is not lit.
(2) KEY LOCK
status lamp lights.
Chart speed does not affect to this operation.
Chart paper forwards at a fixed speed.
Operation during printing
Reference
(1) Trace printing with a cartridge pen is
interrupted. Other functions are continued
without being interrupted.
(2) Programming any parameters
(Range/Printing range, Scale, Alarm, etc.)
cannot be executed during printing.
Program them after the printing ends.

9.3 List Printing

DISP
9
＋
(1)
LIST
or
°F
°C
(2)
→
(4)
(3)
ENTRY
(5)
(6)
again to
ENTRY
(1) Press and
SHIFT
press .
ENTRY
(2) The selection screen from [List 1] to [List 3] appears.
Move the cursor to "1".
(3) When
ENTRY
appears for about 5 sec. For execution, go to
(4).
procedure For no execution, press
(4) Press to start "List 1" printing. The cartridge
ENTRY
pen moves to the end of the left side and the chart
paper forwards slightly.
(5) For interrupting the printing, press
simultaneously. Your recorder returns to the normal
operation but the printing operation is turned off. For
turning on the printing operation, press
then press
ENTRY
(6) When the list printing completes, your recorder
returns to the normal operation.
List 1 printing details
(1) Year/month/day, Time
(3) Range/Printing range
(5) Subtract printing
(7) Printing format
(Note) When the remote contacts (option), which can
program 3 speeds (No.1 to No.3), is added,
the presently selected speed is printed.
Example of the List 1 printing
(Note) The above example is for RD200. It is the same for
RD2800.
－４８－
9
simultaneously, and then
LIST
is pressed,  
DISP
REC
and
ON/OFF
REC
ON/OFF
again.
(2) Chart speed (Note)
(4) Scale
(6) Periodic data printing
(8) Alarm
.
ENTRY
and