Vital Product Data - IBM Flex System p260 Installation And Service Manual

Vital product data

Print Table 1 and use it to record information about your compute node.
You will need this information when you register the compute node with IBM. You can register the
compute node at http://www.ibm.com/support/mynotifications.
To determine the values for your compute node, use the management module and the lsvpd command. If
you are running the Linux operating system, download and install the service and productivity tools for
the Linux operating system to install the lsvpd command.
The model number and serial number are on the ID label that is behind the control panel door on the
front of the compute node, and on a label on the side of the compute node that is visible when the
compute node is not in the IBM Flex System Enterprise Chassis.
A set of blank labels comes with the compute node. When you install the compute node in the IBM Flex
System Enterprise Chassis, write identifying information on a label and place the label on the bezel. See
the documentation for your IBM Flex System Enterprise Chassis for the location of the label placement.
Important: Do not place the label where it blocks any ventilation holes on the compute node or the IBM
Flex System Enterprise Chassis.
Table 1. Vital product data
Vital product data field
Product name
Type model number
2
Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide
Vital product data
IBM Flex System p260 Compute Node and
IBM Flex System p460 Compute Node
IBM Flex System p260 Compute Node:
7895-22X, 7895-23A, 7895-23X
IBM Flex System p460 Compute Node:
7895-42X, 7895-43X
How to find this data
v For FSM:
– Chassis Manager in the
management software web
interface of the IBM Flex System
Manager
v For Hardware Management Console
(HMC):
1. In the navigation area, click
Systems Management > Servers.
2. In the content pane, select the
server you want to work with.
3. Click Tasks > Properties.
v For Integrated Virtualization Manager
(IVM), see IVM lssyscfg command
(http://pic.dhe.ibm.com/infocenter/
powersys/v3r1m5/topic/p7hcg/
lssyscfg.htm).