IBM Flex System p260 Installation And Service Manual page 307

D12B1XXX • D1301XXX
D12B1XXX
Explanation: Initialize the headers dump time and serial numbers
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
D12C1XXX
Explanation: Display final SRC to panel
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
D12D1XXX
Explanation: Rmove /core/core.app.time.pid
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
D12E1XXX
Explanation: Remove /core/core.*
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
D12F1XXX
Explanation: Display beginning SRC to panel
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
D1301XXX
Explanation: Turn off error log capture into dump
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
295
Chapter 8. Troubleshooting