IBM Flex System p260 Installation And Service Manual page 280

CA00E10B • CA00E134
CA00E10B
Explanation: Set RTAS device properties
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E110
Explanation: Create KDUMP properties
Response:
1. Reboot the server.
2. If the problem persists:
a. Go to Checkout procedure.
b. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E130
Explanation: Build device tree
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E131
Explanation: Create root node properties
Response:
1. Reboot the server.
2. If the problem persists:
a. Go to Checkout procedure.
b. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E134
Explanation: Create memory node
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
268
Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide