IBM Flex System p260 Installation And Service Manual page 200

B700BAD2 • B700F107
B700BAD2
Explanation: System firmware detected an error.
Response:
1. Collect the event log information.
2. Go to Isolating firmware problems.
B700F103
Explanation: System firmware failure
Response:
1. Collect the event log information.
2. Collect the platform dump information.
3. Go to Isolating firmware problems.
B700F104
Explanation: Operating system error. System firmware terminated a partition.
Response: Check the Management Module event log for partition firmware error codes (especially BA00F104); then,
take the appropriate actions for those error codes.
B700F105
Explanation: System firmware detected an internal error
Response:
1. Collect the event log information.
2. Collect the platform dump information.
3. Go to Isolating firmware problems.
B700F106
Explanation: System firmware detected an error
Response: Replace the system-board and chassis assembly, as described in Replacing the system-board and chassis
assembly.
B700F107
Explanation: System firmware detected an error.
Response:
1. Collect the event log information.
2. Go to Isolating firmware problems.
188
Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide