IBM Flex System p260 Installation And Service Manual page 291

CA00E1B3 • CA00E1D4
CA00E1B3
Explanation: XON received
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1B4
Explanation: System-directed boot-string didn't load an operating system
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1B5
Explanation: Checking for iSCSI disk aliases
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1D0
Explanation: Create PCI self configuring SCSI device (SCSD) node
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1D3
Explanation: Create SCSD block device node (SD)
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00E1D4
Explanation: Create SCSD byte device node (ST)
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
279
Chapter 8. Troubleshooting