IBM Flex System p260 Installation And Service Manual page 277

CA0000A0 • CA00D008
CA0000A0
Explanation: Open firmware package corrupted (phase 2)
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00D001
Explanation: PCI probe process completed, create PCI bridge interrupt routing properties
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00D002
Explanation: PCI adapter NVRAM hint created; system is rebooting
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00D003
Explanation: PCI probing complete
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00D004
Explanation: Beginning of install-console, loading GUI package
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
CA00D008
Explanation: Initialize console and flush queues
Response:
1. Go to Checkout procedure.
2. Replace the system-board, as described in Replacing the system-board and chassis assembly.
265
Chapter 8. Troubleshooting