IBM Flex System p260 Installation And Service Manual page 222

BA09000C • BA090010
BA09000C
Explanation: The media is write-protected
Response:
1. Change the setting of the media to allow writing, then retry the operation.
2. Insert new media of the correct type.
3. Reboot the server.
4. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA09000D
Explanation: The media is unsupported or not recognized.
Response:
1. Insert new media of the correct type.
BA09000E
Explanation: The media is not formatted correctly.
Response:
1. Insert the media.
2. Insert new media of the correct type.
3. Reboot the server.
4. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA09000F
Explanation: Media is not present
Response:
1. Insert new media with the correct format.
2. Reboot the server.
3. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
BA090010
Explanation: The request sense command failed.
Response:
1. Troubleshoot the SCSD devices.
2. Verify that the SCSD cables and devices are properly plugged. Correct any problems that are found.
3. Replace the SCSD cables and devices.
4. Reboot the server.
5. Search RETAIN tips and the firmware change history for the reference code to determine the recommended
actions. If a firmware update is needed, see Updating the firmware
210
Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide