Removing And Replacing Tier 1 Crus; Removing The Compute Node Cover - IBM Flex System p260 Installation And Service Manual

Removing and replacing tier 1 CRUs

Replacement of tier 1 customer-replaceable units (CRUs) is your responsibility.
About this task
If IBM installs a tier 1 CRU at your request, you will be charged for the installation.
The illustrations in this documentation might differ slightly from your hardware.

Removing the compute node cover

Remove the compute node from the chassis unit and press the compute node cover releases to open and
remove the compute node cover.
About this task
Figure 9. Removing the cover from an IBM Flex System p260 Compute Node
39
Chapter 6. Installing and removing components